Distributive Valve
|
Valve MIVALT – Type SB160
Distributive valve MIVALT is used for shifting the air flow supply between two consumers from one source. It is used in systems where it is necessary to supply air or inactive unaggressive gas periodically.
The valve can be used in different devices and technological systems with low pressure as a distributing gear for remote automatic control of the air flow. |
 |
Technical characteristics of the valve Mivalt SB160
|
Threaded joint diameter
inch |
Air pressure[Bar] |
Material |
Weight
[kg] |
Voltage [V] |
Consumed power[W] |
|
min |
max |
Case |
Cord |
|
G1/2 |
0 |
0.5 |
Polypropene |
PVC |
0.45 |
230 |
8 |
Operation algorithm:
With no voltage:
The air flow is supplied from the source to the clearing hole 1 and is supplied to the consumer through the clearing hole 2.
With voltage:
The plunger of the magnet coil is drawn in. The clearing hole 2 it shut down. The air flow is supplied through the clearing hole 3 to another consumer.
Scheme 1
The valve can be installed at the pipeline in any position (the operating medium movement direction should match the one indicated by the arrow on the case). Temperature conditions for the MIVALT valve should be from -15 to +80 degrees C. The valve is the dampproof version Ip 65.
|
